Products
A company specializing in the development, production and sales of in vitro diagnostic products.
Product classification
Contact Us
Phone/WeChat:
E-mail:
info@immuno-test.com
Address:
Building 1, 578 No.20 Street, Qiantang District, Hangzhou City, Zhejiang Province
Monkeypox virus IgG Rapid Test
Phone:0571-85368996 | Email:info@immuno-test.com
Abbr.:
Specification:
Specimen:
Assay Time:
Model No.:
HMKP055X
Model No.: HMKP055X
Assay Time: 10-15 minutes
Specimen: Whole Blood,serum or plasma
Monkeypox virus IgG Rapid Test
Graphic Details
INTENDED USE
The Monkeypox virus IgG Rapid Test is a rapid chromatographic immunoassay for the qualitative detection of IgG antibodies to Monkeypox virus in human whole blood, serum, or plasma as an aid in the diagnosis of Monkeypox infections.
| [Product Name] | Monkeypox virus IgG Rapid Test |
| [Product No.] | HMKP055X |
| [Assay Time] | 10-15 minutes |
| [Specimen] |
Whole blood, serum, or plasma |
| [Storage Temperature] | 2-30℃, DO NOT FREEZE |
| [Usage] | For the detection of IgG Monkeypox antibodies in human whole blood, serum, or plasma. |
| [Packing] | 20 tests/box |
| [Materials Provided] | Individually packed test devices |
| Disposable pipettes |
|
| Package insert |
|
|
Buffer |
PRINCIPLE
The Monkeypox virus IgG Rapid Test is a qualitative membrane - based immunoassay for the detection of Monkeypox antibodies in whole blood, serum, or plasma.
TEST PROCEDURE
Allow the test device, specimen, buffer, and/or controls to reach room temperature (15 - 30°C) prior to testing.
1.Remove the test device from the sealed pouch and use it as soon as possible.
2. Place the test device on a clean and level surface.
For Serum or Plasma Specimens:
Hold the dropper vertically, draw the specimen up to the Fill Line (approximately 10 μL), and transfer the specimen to the specimen well (S) of the test device, then add 2 drops of buffer (approximately 80 μL) and start the timer. Avoid trapping air bubbles in the specimen well (S).
For Whole Blood (Venipuncture/Fingerstick Specimens):
To use a dropper: Hold the dropper vertically, draw the specimen 0.5 - 1 cm above the Fill Line, and transfer 2 drops of whole blood (approximately 20 μL) to the specimen well (S) of the test device, then add 2 drops of buffer (approximately 80 μL) and start the timer.
To use a micropipette: Pipette and dispense 20 μL of whole blood to the specimen well (S) of the test device, then add 2 drops of buffer (approximately 80 μL) and start the timer.
3. Read results at 10 minutes. Do not interpret the result after 20 minutes.
INTERPRETATION OF RESULTS
POSITIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).
NEGATIVE: Only one colored band appears in the control region (C). No apparent colored band appears in the test region (T).
INVALID: Control band fails to appear.
Previous Page
Previous Page
Related Products
Online message