Products
A company specializing in the development, production and sales of in vitro diagnostic products.
Product classification
Contact Us
Phone/WeChat:
E-mail:
info@immuno-test.com
Address:
Building 1, 578 No.20 Street, Qiantang District, Hangzhou City, Zhejiang Province
Syphilis Antibody Rapid Test
Phone:0571-85368996 | Email:info@immuno-test.com
Abbr.:
Specification:
Specimen:
Assay Time:
Model No.:
HTP063T
Model No.: HTP063T
Assay Time: 10-15 minutes
Specimen: Whole Blood,serum or plasma
Syphilis Antibody Rapid Test
Graphic Details
INTENDED USE
Syphilis Antibody Rapid Test is a rapid chromatographic immunoassay for the qualitative detection of antibodies (IgG and IgM) to Treponema Pallidum (TP) in whole blood, serum or plasma to aid in the diagnosis of Syphilis.
| [Product Name] | Syphilis Antibody Rapid Test |
|
| [Product No.] | HTP063T |
|
| [Assay Time] | 10-15 minutes | |
| [Specimen] |
Whole blood, serum, or plasma |
|
| [Principle] | Rapid chromatographic immunoassay | |
| [Storage Temperature] | 2-30℃, DO NOT FREEZE | |
| [Usage] | For the detection of TP antibodies (IgG and IgM) in whole blood, serum, or plasma. |
|
| [Packing] | 20 tests/box | |
| [Materials Provided] | Individually packed test devices |
|
| Disposable pipettes |
||
| Package insert |
||
|
Buffer |
|
PRINCIPLE
The Syphilis Antibody Rapid Test is a qualitative membrane - based immunoassay for the detection of TP antibodies (IgG and IgM) in whole blood, serum, or plasma.
TEST PROCEDURE
Allow the test device, specimen, buffer, and/or controls to reach room temperature (15 - 30°C) prior to testing.
1. Remove the test device from the sealed pouch and use it as soon as possible.
2. Place the test device on a clean and level surface.
For Serum or Plasma Specimens:
-
Hold the dropper vertically, draw the specimen up to the Fill Line (approximately 5 μl), then transfer the specimen to the specimen well (S) of the test device, and add 3 drops of buffer (approximately 90 μl) and start the timer. See illustration below. Avoid trapping air bubbles in the specimen well (S)
For Whole Blood Specimens:
- To use a dropper: Hold the dropper vertically, draw the specimen 0.5 - 1 cm above the Fill Line, and transfer 1 drop of whole blood (approximately 10 μl) to the specimen well (S) of the test device, then add 3 drops of buffer (approximately 90 μl) and start the timer. See illustration below.
- To use a micropipette: Pipette and dispense 10 μl of whole blood to the specimen well (S) of the test device, then add 3 drops of buffer (approximately 90 μl) and start the timer.
3. Wait for the colored line(s) to appear. Read results at 10 minutes. Do not interpret the result after 20 minutes.
INTERPRETATION OF RESULTS
POSITIVE: Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T).
NEGATIVE: Only one colored band appears in the control region (C). No apparent colored band appears in the test region (T).
INVALID: Control band fails to appear.
Previous Page
Next Page
Previous Page
Next Page
Related Products
Online message